BWCSH - NCBB SOLDER WICK

  • MSDS: BWCSH
  • Manufacturer: MULTICORE SOLDERS
  • Product Name: NCBB SOLDER WICK
  • National Stock Number: 3439-00N055911
Product Identification

Product ID:NCBB SOLDER WICK
MSDS Date:03/03/1992
FSC:3439
NIIN:00N055911
MSDS Number: BWCSH

Responsible Party
MULTICORE SOLDERS
CANTIAGUE ROCK RD
WESTBURY, NY 11590
US

Emergency Phone: 214-238-1224

Info Phone: 516-334-7997

Preparer: ROBERT GILBERT

Cage: 03051

Contractor
MULTICORE SOLDERS
WESTBURY, NY 11590 US

Telephone: 214-238-1224

Cage: 03051

Ingredients

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 95-100%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SMOKE OR FUMES MAY IRRITATE
EYES AND RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYES: FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE FROM
EXPOSURE. INGESTION: GET IMMEDIATE MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:SWEEP UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID BREATHING FUMES. STORE IN COOL,
DRY AREA.
Other Precautions:NONE KNOWN.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: REMOVE SMOKE FROM BREATHING AREA. MECHANICAL
(GENERAL): ADEQUATE. SPECIAL: NOT NORMALLY NEEDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEETS
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:FLUX COATED COPPER BRAID WITH NEUTRAL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE KNOWN.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . TREAT AS SCRAP METAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.